Holley carb not listed on Holley site?

Home  \  Repairs & Maintenance  \  Holley carb not listed on Holley site?

Hey guys,
I'd like to rebuild the carb for my 88 Ford Crown Vic police pkg (351 Windsor) but I can't find any information on it after several hours of researching. The carb is marked very clearly as a Holley with list# 80179 and date code 0404. I've looked at the Holley carb numerical listing at http://www.holley.com/HiOctn/ProdLine/CarbList.pdf but it skips over my list number :banghead:. Any ideas on where I can get the information I need?

Thanks!

Note: here's a picture I found on eBay of a different model Holley carb that looks nearly identical to mine.
http://i3.ebayimg.com/02/i/01/f5/6e/c8_1_b.JPG

posted by  JudMud

You could try www.rockauto.com :2cents:

posted by  lectroid

http://www.partsamerica.com/PartDetails.asp?SourceArea=&SourcePage=SEARCHRE SULTS&MfrCode=EDB&MfrPartNumber=1477&CategoryCode=3339U

Maybe?

posted by  DodgeRida67

Whoops - you wanted info on the carb. I'll see if I can find you a haynes manual that covers your carb. What model is it? (like 1920 ect)

posted by  DodgeRida67

I'm not sure which model it is because it is not listed on the carb as far as I can tell. All I could find is the name "Holley," the list number and the date code. If the list number were listed on holley.com it would tell me the model number but it's not.

However, www.rockauto.com (suggested by lectroid) gives a list of carbs for my car. I'm not sure if mine is in the list but it lists 5 versions of the 2300 model and one 7200. By the way, would any of these carbs work on my car if I were to pick one up?

Thanks a ton for your help guys!

posted by  JudMud

According to several sources, the Ford 351 W used in the 1988 Crown Vic (police package) had a Motorcraft 7200 VV. It is the same basic carb as the Motorccccraft 2700 VV except is is of a feedback design to work with the EEC-IV computer system

The Haynes manual will focus on the non-police Crown Vic with the 302 cid (5.0L) fuel injected V-8. It will not have much info on the Police Interceptor with the 351 Windsor V-8

I cant offer much more for this one

posted by  tbaxleyjr

So if it's a Holley, it's a dual barrel right? If so, it's probably one of the following models: 5200, 5210/5220, 6500/6510/6520. The exact model should be in one of the following locations: On the intake (top) tower on the side. (choke tower).....and thats all I can tell you.

posted by  DodgeRida67

:thumbs: ALL RIGHT, I'VE GOT IT. A COPY OF AN ORIGINAL INSTALLATION MANUAL FOR THE 80179 IN PDF FORM. A BIG THANKS IS IN ORDER TO TOM R KISE AT HOLLEY TECH SERVICE FOR KNOWING HIS S**T. HE KNEW IMMEDIATELY WHAT I WAS WORKING ON AND E-MAILED THIS TO ME IN MINUTES. AFTER LOOKING FOR INFO ON THIS CARB FOR TWO WEEKS IT WAS NICE TO FIND SOMEONE WITH THE RIGHT INFO. HOLLEY IF YOUR LISTENING GIVE THAT MAN A RAISE!!! SINCE THIS SITE WILL ONLY ALLOW 100K FILE UPLOAD, E-MAIL ME AND I WILL FORWARD IT TO YOU. I DON'T CHECK MY E-MAIL EVERYDAY SO BE PATIENT.
REDNECK-76@HOTMAIL.COM
P.S. NICE RIDE lectroid

posted by  REDNECK-76

Check the dates of the posts.

posted by  giant016

I AM AWARE OF THE DATES. IF YOU GOOGLE OR YAHOO "HOLLEY 80179" THIS IS ONE OF THE FEW SITES THAT POP UP THATS NOT EBAY. I POSTED THIS FOR PEOPLE WHO MAY NEED THE INFO NOW AND IN THE FUTURE, KINDA LIKE I NEEDED IT THREE WEEKS AGO. SMART A$$ :fu:

posted by  REDNECK-76

So tell me, did you by any remote chance Google "Caps lock" while you were at it? :banghead:

posted by  Cliffy

Your Message