Hey i have Belden high temp 8mm wires on my 85 olds cutlass ciera 3.8L. It has a HEI ignition system. Ive been upgrading it, i wanna change the wires and i measured and the shortest wire for cylinder # 1 about one foot measured to be 10000ohms, which i thought was way to much. I found Accel wires Super Stock Spiral wires for my application that are only 500ohms/ft. Wondering if anyone has experience with them, or had any other reccomandations for wires. Msd makes the best wires 50ohms/ft but not for my applications grrr!. What about 10mm wires, or would that cause problems. Thanks!