Car Forums  

Go Back   Car Forums > Vehicle Specific > Asian Imports
FAQ Search Today's Posts Mark Forums Read

Reply
 
Thread Tools Search this Thread Display Modes
Old 12-27-2004, 08:00 PM   #1
Godlaus
UnFedFat in Disguise
 
Godlaus's Avatar
 
Join Date: Dec 2004
Posts: 1,697
N20 : The Basics

Time for an Update!

First of, NOS originally stood for New Old Stock (ask if you're curious). Nowadays, it's brand. So don't brag about how you got NOS in your car, if the manufacturer is really ZEX.

(Thanks "Fast and the Furious"). N20 (two parts nitrogen, one part oxygen) is an oxidizer, not some form of a fuel.

Most people believe it's a form of fuel thanks again to the fast and the furious, because of the engine renderings showing nitrous hitting the combustion chambers and creating the blue explosion. That's actually gas reacting with oxygen to expand, pushing the piston south. Think of nitrous as a thing that doubles your displacement, which means more horsepower.
You ever wondered why Nitrous is packed in giant steel bottles? Thatís because they need to be held at over 700 psi to keep it at room temperature (Or the whereabouts). *Note = If you have a Nitrous and live in Arizona, with temps over 95 degrees, you may have complications and need a stronger tanks, as the pressure will jump to 1000 psi if you live in a hot climate. So, when the Nitrous goes from 700 psi to 14.7 psi (Room pressure), the temperature of it will drop through the floor. Because nitrous boils at negative 120, itíll cool down everything around it pretty quick. So, colder air in the combustion chamber, more compact air, more gas/fuel ratio, and more horsepower. Plain and simple, but not really. So why do most people think nitrous is dangerous to an engine? Well, it is if youíre a dumba$$ and just add in the nitrous injectors and thatís it. If you just throw on the N20, youíre engine will run lean. Standard fuel management systems for Nitrous will keep your engine running rich, which prevents N20 from blowing up your engine. The actual physics of it is that nitrous needs some fuel to react with, or else the temperatures go to hell (get really hot). The rest of the oxygen that didnít burn with fuel will oxidize anything it can get to. Which are your combustion chamber walls. Unless you want to replace the top end of your engine every time you use Nitrous, you should get bigger fuel injectors and a fuel management to make your engine run rich. So, what else is there to say? Of course, running nitrous always comes with risks, as youíre preparing your car for speeds it wasnít prepared for, so I you really want a nitrous engine that will last, go for the whole 9 yards. Buy strong connecting rods, new pistons (If youíre gonna get nitrous, you can probably afford a turbo also), new intake (see DSMí post about intakes), new exhaust, new torque resistant crankshaft, etc. etc. Visit some of these sites for info on N20 and what to buy. Always go for the complete kit if youíre a beginner with a lot of money.

www.zex.xom
www.overboost.com
www.nosnitrous.com
www.nitrousexpress.com

So what about the different types of nitrous? There's wet, dry and direct port systems.

Direct port is where the gas and Nitrous lines go directly to the cylinder, instead of at the manifold intake. This way, you don't get an uneven distribution of N20, and you don't have to worry about upgrading your fuel injectors to get your car to run rich.



A Wet system is where you have a gas and N20 line go together to the manifold intake, so don't have to upgrade your fuel injectors, but, you have the uneven distribution of Nitrous to worry about.


A dry system is where you just have the Nitrous solenoid at the head of the intake manifold, and it sprays the now gas Nitrous into the pistons. Still have to worry about upgrading your fuel injectors and uneven distribution.



Here's another good reference site;
http://www.magnumforceracing.com/sto...s/wetvsdry.htm
__________________
I am everything you want to be

Last edited by Godlaus : 03-20-2005 at 02:55 AM.
Godlaus is offline   Reply With Quote
Old 01-07-2005, 12:01 PM   #2
Tyko
CF Newbie
 
Join Date: Jan 2005
Posts: 44
This helped some, thanks bro. I'll read the intake info to see if theres something else I can learn.
Tyko is offline   Reply With Quote
Old 02-26-2005, 02:08 AM   #3
CarEXPERT
Banned
 
Join Date: Jan 2005
Location: Bay Area, California
Posts: 1,117
When nitrous is hotter than 95degrees F then the nitrous will turn into a gas and the pressure will go up. And the nitrous to fuel ratio should be 5.5:1 which is on the rich side but its always good to run rich when using nitrous fore safty of the engine.

Godaus in your posts you didnt explain how nitrous is pumped from the bottle to the soldnoids can you please explain. ANd also there are diffrent ways to how its activated but I dont know all of them. DOes injecting nitrous into your intercoolers work? cuz the the nitrous would be cold so would it work?
CarEXPERT is offline   Reply With Quote
Old 02-26-2005, 03:35 AM   #4
StiMan
CF Retired Post Whore
 
StiMan's Avatar
 
Join Date: Mar 2004
Location: Dallas, TX, USA
Posts: 2,964
Jeez Gaulaus! You still in Texas? Doing a lot of scavenging...
__________________
John

StiMan is offline   Reply With Quote
Old 02-26-2005, 05:09 AM   #5
Godlaus
UnFedFat in Disguise
 
Godlaus's Avatar
 
Join Date: Dec 2004
Posts: 1,697
Quote:
Originally Posted by CarEXPERT
Godaus in your posts you didnt explain how nitrous is pumped from the bottle to the soldnoids can you please explain. ANd also there are diffrent ways to how its activated but I dont know all of them. DOes injecting nitrous into your intercoolers work? cuz the the nitrous would be cold so would it work?

One thing you will learn from life, is that everything is balanced, and things that aren't balanced will try to balance out themselves. It's roughly 700 psi in the Nitorus tanks. It's 14.7 psi at the end of the solenoid. Pressures try to equilibriate, so the nitrous flows from high pressure to low pressure. When you press the little red button, you're opening up a flow gate that allows the high pressure nitrous to flow to the low pressure area. Injecting nitrous into your intercooler? Why? It would work better and faster in the combustion chambers.

Quote:
Jeez Gaulaus! You still in Texas? Doing a lot of scavenging...

I'm bored......
__________________
I am everything you want to be
Godlaus is offline   Reply With Quote
Old 02-26-2005, 08:09 AM   #6
mazda6man
im JDM TITE YO!
 
mazda6man's Avatar
 
Join Date: Dec 2002
Location: Austin, TX
Posts: 2,158
my thoughts on nitrous
__________________
I = JDM titeness
Toyota 4 Life;
I rock X Chassis Toyotas daily
My rides = 1992 Cressida aka "the Cressy"
1985 Cressida aka "pain in my asshole"

mazda6man is offline   Reply With Quote
Old 03-29-2005, 04:20 PM   #7
gtr_man
CF Newbie
 
Join Date: Feb 2005
Posts: 42
Quote:
Originally Posted by mazda6man
my thoughts on nitrous
you should like nitrous a little, it can speed up your car really fast
gtr_man is offline   Reply With Quote
Old 02-26-2005, 08:53 AM   #8
carlos
CF Addict
 
Join Date: Feb 2005
Posts: 273
Quote:
Originally Posted by Godlaus
One thing you will learn from life, is that everything is balanced, and things that aren't balanced will try to balance out themselves. It's roughly 700 psi in the Nitorus tanks. It's 14.7 psi at the end of the solenoid. Pressures try to equilibriate, so the nitrous flows from high pressure to low pressure. When you press the little red button, you're opening up a flow gate that allows the high pressure nitrous to flow to the low pressure area. Injecting nitrous into your intercooler? Why? It would work better and faster in the combustion chambers.


I'm bored......
i believe the typical pressures of a nitrous bottle are higher than 700 psi, optimal pressures are about 1100 psi, and the tanks are required by law to be able to hold 1800psi. The tanks are also stamped with a date of certification and must be within 5 years for any place to refill it(at least legally)
the whole nitrous, intercooler combo is done to keep temperatures low, which in turn allows more spark advance(is also a denser charge) without detonation at high boost levels. This was done by the late John Lingenfelter.(created a 1200 hp 4cyl tubocharged Ecotec engine)
carlos is offline   Reply With Quote
Old 02-26-2005, 11:08 PM   #9
Godlaus
UnFedFat in Disguise
 
Godlaus's Avatar
 
Join Date: Dec 2004
Posts: 1,697
Quote:
Originally Posted by carlos

i believe the typical pressures of a nitrous bottle are higher than 700 psi, optimal pressures are about 1100 psi, and the tanks are required by law to be able to hold 1800psi. The tanks are also stamped with a date of certification and must be within 5 years for any place to refill it(at least legally)
the whole nitrous, intercooler combo is done to keep temperatures low, which in turn allows more spark advance(is also a denser charge) without detonation at high boost levels. This was done by the late John Lingenfelter.(created a 1200 hp 4cyl tubocharged Ecotec engine)


If the temperature of the nitrous is above 97 degrees fahrenheit, then the PSI jumps to about 1000. That's why some makers hold the tank at 700, others at 1000. it all depends on the environment, and whether or not you want to buy cheaper goods that will serve you well in your area. Dunno about the law thing....only lawful thing about Nitrous I know is that it's legal to install (in the US), but illegal to use. (too much emissions).

Sounds liek you've done your research also, thanks for contributing.

Quote:
How can you be bored in Dallas? Go to Harry Hines... lots of strip clubs. Lol...

yeah, but I still look like I'm 17. Sucks.........And, I had to renovate my grandparent's house while I was down there. Pretty boring for me, but probably a fun place to be for you.
__________________
I am everything you want to be
Godlaus is offline   Reply With Quote
Old 02-26-2005, 04:56 PM   #10
StiMan
CF Retired Post Whore
 
StiMan's Avatar
 
Join Date: Mar 2004
Location: Dallas, TX, USA
Posts: 2,964
Quote:
Originally Posted by Godlaus
One thing you will learn from life, is that everything is balanced, and things that aren't balanced will try to balance out themselves. It's roughly 700 psi in the Nitorus tanks. It's 14.7 psi at the end of the solenoid. Pressures try to equilibriate, so the nitrous flows from high pressure to low pressure. When you press the little red button, you're opening up a flow gate that allows the high pressure nitrous to flow to the low pressure area. Injecting nitrous into your intercooler? Why? It would work better and faster in the combustion chambers.


I'm bored......
How can you be bored in Dallas? Go to Harry Hines... lots of strip clubs. Lol...
__________________
John

StiMan is offline   Reply With Quote
Old 06-12-2005, 08:49 PM   #11
Guns_10
CF Newbie
 
Join Date: May 2005
Posts: 70
dose nos nlow up?

couple of my friends says nos blows up, cuz they saw the fast and the furious.. but i disagree.. can ya help us out?
Guns_10 is offline   Reply With Quote
Old 06-12-2005, 10:11 PM   #12
Godlaus
UnFedFat in Disguise
 
Godlaus's Avatar
 
Join Date: Dec 2004
Posts: 1,697
Quote:
Originally Posted by Guns_10
couple of my friends says nos blows up, cuz they saw the fast and the furious.. but i disagree.. can ya help us out?

NITROUS does not blow up. It lowers the temperature of everything around it (air, specifically), so more air molecules can fit into the combustion chamber, and it's an oxidizer in itself. NOS (a form of nitrous) is not flammable (it says not flammable on the bottles), exposive, in any form.
__________________
I am everything you want to be
Godlaus is offline   Reply With Quote
Old 06-13-2005, 06:36 AM   #13
Guns_10
CF Newbie
 
Join Date: May 2005
Posts: 70
would it blow just from the compresion if it got punctured?
Guns_10 is offline   Reply With Quote
Old 06-14-2005, 02:24 AM   #14
Godlaus
UnFedFat in Disguise
 
Godlaus's Avatar
 
Join Date: Dec 2004
Posts: 1,697
Quote:
Originally Posted by Guns_10
would it blow just from the compresion if it got punctured?

Not really, it would just be like taking aplastic bag, filling it with air, closing it, and hitting the thing hard enough so that it breaks. It wouldn't explode, but elave a big hole and make a lot of noise. And punctured 1400 psi bottles contribute to driver fatalities every year. There was a petition to illegalize N20 because of this reason.
__________________
I am everything you want to be
Godlaus is offline   Reply With Quote
Old 10-08-2006, 02:58 AM   #15
chris_knows
๑۩۞
 
chris_knows's Avatar
 
Join Date: Apr 2005
Location: Ontario, Canada Status:Trying to find my ish
Posts: 7,630
I was looking for another thread, but came across this and re-read it. Some more people should read it, but there is some misinformation...N2O does not look like this:

...Molecules can't form those shapes because of the electrons (Not sure exactly why, but my last test shows that it's the wrong way to do it lol)...It would actually look like this lol:
__________________
chris_knows is offline   Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Forum Jump



All times are GMT +1. The time now is 08:54 AM.

Powered by vBulletin Version 3.5.4
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Copyright © 2002 - 2011 Car Forums. All rights reserved.